Rain Bird RSD Series Rain Shut-off Sensor

Dial-in Convenience
The Rain Bird RSD series sensor prevents overwatering caused by natural rainfall by automatically shutting off your irrigation controller’s watering cycle.
Internal moisture sensing discs work in a variety of climates to alert the irrigation controller to sufficient rainfall.
Select from multiple rainfall settings from 5mm to 20mm by adjusting the dial counter clockwise to increase the rainfall setting.
For best results, select a lower rainfall setting for clay soil types and a higher setting for sandy soils.
Complete with an adjustable vent ring to determine drying time allowing full customisation of how long the program is suspended.

High-Quality and Performance
Engineered using high-quality, robust materials designed to resist harsh weather conditions thus reducing service call-backs.
The high-grade, UV-resistant polymer body resists the elements for long-lasting performance.
For flexible and reliable installation, the rugged aluminium bracket and arm extend to a full 15.2cm whilst the latching hinge maintains alignment after installation.
Complete with 7.6 metres of UV-resistant extension wire for easy placement of the sensor and connection to irrigation controllers.

Compatibility
Fully compatible with most Rain Bird Irrigation Controllers (Excluding the ESP-SMT or ESP-SMTe Controller).
For further information, read the Installation Guide.

• Application: Suitable for low voltage 24 VAC control circuits and 24 VAC pump start relay circuits
• Switch electrical rating: 3A @ 125/250 VAC
• Capacity: Electrical rating suitable for use with up to ten 24 VAC, 7 VA solenoid valves per station, plus one master valve
• Wire: 7.6m (25 feet) UL, cUL listed; CE, C-Tick approved

• Overall length: 6.5" (16.5 cm)
• Overall height: 5.4" (13.7 cm)
• Bracket hole pattern: 1.25" (3.2 cm)