Hozelock Sensor Controller Water Timer

Easy to set up

Day light sensor which automatically adjusts watering schedule 

Manual 'water now' button for 60 minutes of watering at any time

Failure Prevention Mode to indicate battery replacement

Day Light Sensor The Controller includes a daylight sensor that automatically adjusts your watering schedule to start at sunrise and sunset each day.

Watering Schedule Choose from 2, 5, 10, 20, 30 or 60 minutes - easy to adjust. Alternatively select 'Water Now' for 10, 30 or 60 minutes of watering.

Battery Status Press the button to check battery status - LED lights illuminate to indicate battery strength.

Easy Set Up Insert 2 x AA batteries (not supplied) and select your watering pattern from the dials

The Hozelock Sensor Controller includes a day light sensor that automatically adjusts your watering schedule to start at sunrise and sunset every day. It features a single dial that allows you to simply select morning, evening, or both, followed by the length of time you would like it to run for - either 2, 5, 10, 20, 30, or 60 minutes. This will then repeat at sunrise, sunset or both every day - This is the optimum time of day for watering to avoid water evaporation and leaf scorch.The sensor controller is versatile and is suitable for use with sprinklers up to 10 bar, micro irrigation systems at 1.5 bar and water butts at 0.1 bar pressure.The timer requires 2 x AA batteries (Not included) and features a battery check function. The in-built LED light will flash red when the battery needs to be replaced. The controller connects directly to your outdoor tap and is supplied with 1/2", 3/4" and 1" BSP thread connectors.

To activate your product guarantee, please register the purchase on the Hozelock website.

The timer must be removed from the tap and drained of any sitting water before the first frosts and stored over winter indoors in a frost-proof garage or shed in an upright position.