We recommend carefully reading and observing the regulations outlined in the instruction manual.

Control-D Technology With Pressure & Flow Sensor
A control device designed to provide an automatic on/off operation of electric-driven water pumps.
Fitted with a detachable system pressure gauge/manometer
Designed to command and protect 230 Volt pumps
For further information, read the Control-D Instruction Manual
Please Note: Before installing the device check the technical features and make sure they comply with the pump and system.

Automatic & Manual Restart Function
With automatic on-and-off control, the Control-D is an active system that converts this garden pump into a unit that will start automatically when outlet points are open, provide constant water pressure and switch off automatically after the outlets close.

Design Features
Adjustable cut-in pressure designed to adjust the defined start pressure to 1.5 bar, 2 bar, or 3 bar depending on your system requirements.
Integrated pressure gauge and flow sensor
Dry running protection
Automatic restart function and manual restart function
Retrofit onto single-phase electric water pumps

• Single Phase Mains Voltage: 230 Vac
• Acceptable Voltage Fluctuation: +- 10%
• Frequency: 50 – 60 Hz
• Current: Max 16(8) A
• Power: 1,5 Kw (2HP)
• Protection Degree: IP65
• Maximum Running Pressure: Max 12 Bar (1,2MPa)
• Maximum Running Temperature: Max 65°C
• Minimum Flow: ~ 1/min
• Male Connectors: 1” Inlet & Outlet

Pump Not Included

Troubleshooting The EuroInox Pump