HydroSure Snap On Quick Click Joiner - 13mm - Black - Pack of 5
168 In Stock
The Snap-On attachment promises a fast, secure and reliable watertight connection ideal for connecting a garden hose to irrigation pipe. See Full Description
The clever Snap-On mechanism allows quick and easy connection between a garden hose and 13mm Soaker Hose. To install, connect a Hose End Connector to the quick-click male outlet and push the barbed outlet inside the internal bore of the irrigation pipe.
Watertight Connection
The Snap-On outlet features an anti-perishable rubber O-ring and locking shelf creating a secure watertight connection to a garden hose. The ergonomically shaped tapered outlet allows the irrigation pipe to easily slide onto the joiner and the protruding barb anchors it securely into place.
Healthy Plants
Use barbed connectors to create a pipe network individually tailored to your garden layout. The connector’s wide internal bore promises minimal flow disruption whilst the smooth internal diameter reduces friction loss.
UV Resistant
Made from high-quality UV-stabilised materials for long life and protection against deterioration when exposed to sunlight. The robust raw materials this connector is made from means it can easily withstand bar pressures required for low/high volume irrigation systems.
Build an Irrigation System
Ideal for use in micro-irrigation/emitter systems or domestic underground pop-up sprinkler systems that function at optimal pressures between 0.5 bar to 3 bar pressure.
Specifications
Fits Internal Pipe Diameter: 13mm
Connection Type: Single Barbed/Quick Click
Maximum Bar Pressure: 3 Bar
Please Note: Snap On connectors are for use with Plastic Hose End Connectors and are not compatible with metal versions.
Irrigation Fittings Frequently Asked Questions
My connector has a different size printed on the fitting – I have received the wrong product!
The external diameter is printed on the surface of a barbed and nut lock fitting however, compatible Drip Line, Soaker Hose and LDPE Pipe are quoted by their internal diameter. For easy identification of the compatible pipe, you will see our barbed and nut lock connectors listed with their internal diameter because connectors push inside the pipe. As barbed and nut lock connections must be tight to ensure a secure, watertight seal, we advise heating the pipe in boiling water before installation to make insertion easier.
What size connector does my irrigation supply pipe need?
Irrigation pipe is compatible with connectors the same size as the pipe’s internal diameter. For a more secure connection with minimal risk of pipe dislocation, use connectors 1mm larger than the internal diameter of your pipe to ensure a watertight seal.
My barbed connectors keep coming loose from my irrigation pipe!
Loose barbed fittings indicate either the incorrect-sized connector has been purchased or the pressure running through the system is too high. Too much pressure will cause barbed connectors to dislocate from the pipe. Check that the pressure running through your system is regulated to the correct level using a Pressure Reducer at the start of your system and install a Ratchet Clamp at each connection point to secure the pipe in position.
Can barbed fittings be used with MDPE or HDPE pipes?
Please Note: Branching off 4mm drip line from 13mm or 18mm drip line should be avoided as piercing holes in the sidewall can impact the pre-determined output of emitters. Instead, branch off micro drip line using LDPE as the header pipe.
