Engineered from high-quality UV-stabilised acetal for increased strength, long life and protection against deterioration when exposed to sunlight. Acetal plastic is a robust raw material resistant to heat, chemicals and wear. It produces a much sharper barb than connectors from leading brands meaning the double-barbed edge better anchors itself into the pipe eliminating leaks and offering increased retention against pipe dislocation even when used in high-pressure systems. Trust HydroSure to help you build a reliable pipe network that guarantees long-lasting durability.
Watertight Connection
The ergonomically shaped tapered edge allows the pipe to easily slide onto the joiner and the protruding double barb anchors it securely into place. Please Note: When using 13mm connectors with 13mm LDPE Pipe, a Ratchet Clampmust be installed at each connection point to ensure a watertight seal. Once the pipe is joined to the connector, the distance between each barb produces a flat base for the installation of the clamp. Top Tip: Heat the end of the pipe in hot water for 10-30 seconds for easy installation.
Build an Irrigation System
Ideal for use in micro-irrigation/emitter systems or domestic underground pop-up sprinkler systems that function at optimal pressures between 0.5 bar to 3 bar pressure. Use a Pressure Reducer at the start of your irrigation system to regulate the pressure to the correct level.
Healthy Plants
Use barbed connectors to design and install a pipe network customised to your garden. The connector's wide internal bore promises minimal flow disruption whilst the smooth internal diameter reduces friction loss. Use Pipe Stakes every metre to hold the pipe securely in place with the option to cover it with decorative bark.
Specifications
Fits Internal Pipe Diameter: 13mm
Connection Type: Double Barbed
Maximum Bar Pressure: 3 bar
Irrigation Fittings Frequently Asked Questions
My connector has a different size printed on the fitting – I have received the wrong product!
The external diameter is printed on the surface of a barbed and nut lock fitting however, compatible Drip Line, Soaker Hose and LDPE Pipe are quoted by their internal diameter. For easy identification of the compatible pipe, you will see our barbed and nut lock connectors listed with their internal diameter because connectors push inside the pipe. As barbed and nut lock connections must be tight to ensure a secure, watertight seal, we advise heating the pipe in boiling water before installation to make insertion easier.
What size connector does my irrigation supply pipe need?
Irrigation pipe is compatible with connectors the same size as the pipe’s internal diameter. For a more secure connection with minimal risk of pipe dislocation, use connectors 1mm larger than the internal diameter of your pipe to ensure a watertight seal.
How do I connect LDPE/drip line to a garden hose pipe?
The soft PVC structure of a garden hose is not compatible with barbed or nut lock fittings as these connectors require the rigid pipe structure of drip line or LDPE to lock onto. To connect drip line or LDPE pipe to a garden hose, connect a Barbed Director to a Quick Click Tap Connector by simply threading them together. Connect the LDPE pipe or drip line to the barbed outlet and install the Hose Pipe to the quick-click tap connector via a Hose End Connector.
My barbed connectors keep coming loose from my irrigation pipe!
Loose barbed fittings indicate either the incorrect-sized connector has been purchased or the pressure running through the system is too high. Too much pressure will cause barbed connectors to dislocate from the pipe. Check that the pressure running through your system is regulated to the correct level using a Pressure Reducer at the start of your system and install a Ratchet Clamp at each connection point to secure the pipe in position.
Can barbed fittings be used with MDPE or HDPE pipes?
Yes, barbed fittings are ideal for sub-surface installation up to 15cm and are capable of withstanding bar pressures required for a small domestic underground sprinkler irrigation system. Top Tip: Before burying the system underground, install a Ratchet Clamp to secure each outlet and check each connection is watertight.
How do I branch off micro pipe and micro dripline from irrigation pipe?
Please Note: Branching off 4mm drip line from 13mm or 18mm drip line should be avoided as piercing holes in the sidewall can impact the pre-determined output of emitters. Instead, branch off micro drip line using LDPE as the header pipe.
