HydroSure Barbed Tee - 4mm - Black - Pack of 10

Name: HydroSure Barbed Tee - 4mm - Black - Pack of 10
Brand: HydroSure
SKU: 40346HS
Price: 1.79 GBP
Availability: InStock

Create secure connections between lengths of Micro Pipe for a tailored system. Oustanding value up to 40% cheaper than some leading brands. See Full Description

Product Description

Create secure connections between lengths of Micro Pipe for a tailored system. Oustanding value up to 40% cheaper than some leading brands.

Use this connector with 4mm Micro Pipe or 4mm Drip Line

For Top Tips on how to set up a garden watering system, read our Buyers Guide.

Barbed Connectors Guide

Compatible Pipe & Connectors

Watertight Connection

The ergonomically shaped tapered edge allows pipe to easily slide onto the joiner and the protruding barb anchors it securely into place. Heat the end of the pipe in hot water for 10-30 seconds for easy installation.

Build an Irrigation System

Ideal for use in micro-irrigation/emitter systems that function at optimal pressures between 0.5 bar to 3 bar, such as, micro drip, micro-sprinkler and micro-spray systems. Use a pressure reducer at the start of your irrigation system to regulate pressure to the correct level.

Solutions that Work

Create a network of 4mm pipe for a flexible way to branch off emitters from lateral pipe or navigate a network of microbore soaker hose/dripline. Please Note: 4mm pipe should only be run in 10 metre lengths due to extra friction in smaller pipes which may hinder water flow and efficiency after this length.

UV Resistant

Made from high-quality UV stabilised materials for long life and protection against deterioration when exposed to sunlight. The robust raw materials this connector is made from means it can easily withstand bar pressures required for low/high volume irrigation systems.

Specifications

Internal Diameter: 4mm
External Diameter: 6mm
Connection Type: Single Barbed
Maximum Bar Pressure: 3 Bar

Irrigation Fittings Frequently Asked Questions

What size connector does my irrigation supply pipe need?
Micro pipe is compatible with connectors the same size as the pipe’s internal diameter. Use alongside Micro Pipe and Micro Drip Line when off taking Micro Emitters from the main supply tubing, installing multiple emitters in a row and as part of a tree circle installation.
How do I connect micro pipe/4mm drip line to a garden hose pipe?
When using a garden hose as the main supply, connect a 4mm Tap Connector to an Accessory Adaptor. The hose can be attached to the quick-click male outlet of the accessory adaptor using a Hose End Connector whilst the 4mm barbed outlet joins to the micro pipe. Micro pipe and 4mm drip line can also be connected directly to the tap or from a Timer outlet using a 4mm tap connector.
How do I branch off micro pipe and micro drip line from irrigation pipe?
Begin by piercing a 4mm hole into the side wall of the LDPE Irrigation Pipe using a Hole Punch. One outlet of a 4mm Barbed Joiner can be pushed into the hole created and the other protruding from outside the pipe offers the ideal connection for a length of 4mm Drip Line or 4mm Micro Pipe.
Please Note: Branching off 4mm drip line from 13mm or 17mm drip line should be avoided as piercing holes in the sidewall can impact the pre-determined output of emitters. Instead, branch off micro drip line using LDPE as the header pipe.
How do I cap off the end of a length of micro pipe or 4mm drip line?
Install a Goof Plug or 4mm Valve inside the internal bore for a water-tight connection that maintains water pressure within your irrigation system. A 4mm valve is an ideal end plug solution for micro pipe as it allows the system to be flushed throughout the watering season, alternatively, it can be used to control or isolate water flow.