HydroSure Automated Ultimate 100m Soaker Hose Irrigation System
Everything you need to install a soaker hose irrigation system in your garden! Complete with a Water Timer, Rain Sensor, Pressure Reducer and Filter, we have done all the complicated product selection for you.
For Top Tips on how to build a Soaker Hose System tailored to your garden, read our Buyers Guide or Download the Instruction Manual.
Automated Garden Watering
Keep your garden well-watered without even turning on the tap! The kit arrives complete with a Water Timer easily programmed to commence watering cycles even when you are away from your property! The timer must be removed from the tap and drained of any sitting water before the first frosts and stored over winter indoors in a frost-proof garage or shed in an upright position.
Efficient Water-Saving Irrigation
A soaker hose is a flexible rubber pipe that acts as a wick drawing water via capillary action through porous layers to deliver water directly to the roots. This highly effective yet gentle seeping action minimises water lost through evaporation eliminating soil erosion and surface runoff whilst using 70% less water than conventional methods.
Compatibility
Fully compatible with Hose End Connectors used alongside your garden hose or use additional 13mm Barbed Connectors and Soaker Hose to extend or customise your system. Please note: Soaker Hose is not compatible with Nut Lock connectors.
Components included:
1 x HydroSure Dual Outlet Water Tap Timer with Digital Display (Batteries Included)Enables full control over garden watering! |
1 x HydroSure Mini Click Rain SensorEasily connected to the Timer via the port located on the underside, this Rain Sensor sends communications to the timer to skip watering on rainy days or when the soil is too wet. |
100m x HydroSure Soaker Hose - 13mmIdeal for watering almost everywhere in your garden including, flower beds, vegetable gardens, hedges, and raised beds. |
25m x HydroSure LDPE Pipe - 14mmSupply water to your Soaker Hose from the tap using this irrigation pipe. Simply connect it to your Soaker Hose using a Barbed Joiner from the included fittings pack. |
2 x HydroSure Essential Snap-On Filters - 14mm BarbProlong the life of your Soaker Hose against damaging dirt and sediment particles that would otherwise block the porous layers. Trust this HydroSure filter to keep your irrigation system working at its peak. |
2 x HydroSure 1 Bar Pressure Regulators - 3/4“Installed to each outlet of the timer, this Pressure Regulator maintains regular water application and protects against pressure drops/spikes to maintain optimal performance. |
HydroSure Essential Soaker Hose System FittingsComplete with a variety of connectors to allow for flexibility when laying out your pipe to suit your watering environment. Each connector is engineered from high-quality UV-stabilised acetal for increased strength, long life and protection against deterioration when exposed to sunlight. |
100 x HydroSure Hold Down StakesUse one stake per metre to secure the pipe into position along the length and at connection points. |
1 x HydroSure 2-in-1 Irrigation Pipe Cutter and Hole PunchCut the LDPE Pipe and Soaker Hose to length using this handy irrigation tool. The built-in alignment grooves support the pipe’s structure for maximum water flow. |
Product Code | AUTOPL100LDPE |
---|---|
EAN | 5056287731095 |
Manufacturer's Guarantee | 1 Year |
Adjustable Flow Rate | No |
Internal Diameter | 1/2" / 13mm |
Including Timer? | Yes |
Price Per Unit (Inc. VAT) | 220.00 |