Product code
SPRINKLERSYSTEM
HydroSure Automated Single Zone - Pop Up Sprinkler System with Timer
A comprehensive kit with all the components required for an easy to set up DIY pop up garden sprinkler system. Arrives complete with 180° and 360° interchangeable nozzles and more barbed connectors than other leading brands allowing you complete flexibility when building an und... See Full Description
A comprehensive kit with all the components required for an easy to set up DIY pop up garden sprinkler system. Arrives complete with 180° and 360° interchangeable nozzles and more barbed connectors than other leading brands allowing you complete flexibility when building an underground irrigation system tailored to your garden layout.
For more information on how to build an underground garden sprinkler system including example layouts achieving sufficient sprinkler overlap and head-to-head watering, read our buyer's guides or download our instruction manual.
Zoning a Garden Sprinkler System
Before installing an underground system, calculate the available water and bar pressure from your water source. Top Tip: Use the calculation below to calculate flow rate or attach a Pressure Gauge to your tap. Take the output from each nozzle in litres per minute or litres per hour and multiply by how many sprinklers you intend to run in that sprinkler zone. This tells you how many pop-ups can be run in a single length. Depending on sprinkler output and flow rate usually, a maximum of up to three rotors should be installed in a single zone.
Components included:
 |
HydroSure Digital Display Water Tap TimerThe HydroSure Water Tap Timer is an easy-to-set-up automated solution for your sprinkler system. Top Tip: For ultimate water-saving efficiency, the timer is compatible with the HydroSure Rain Sensor (not included). Simply plug the auxiliary cable from the water sensor into this port. This sends communications to the timer to skip watering on rainy days or when the soil is too wet. |
 |
5 x HydroSure Narrow Profile Spray BodyFeaturing a slim design for time-saving installation in an underground system. The ratcheting riser means the internal riser can be rotated by hand to the required direction of water flow. |
 |
5 x HydroSure Variable Arc Nozzle 90° to 360°A fully adjustable nozzle designed with water-saving efficiency and uniform application in mind. It is easily threaded into the top of the spray body and emits at a reduced flow rate allowing water time to absorb into the ground minimising water run-off and soil erosion ensuring water is delivered exactly where it is required. |
 |
HydroSure LDPE Pipe - 25mA length of irrigation pipe ideal for small sub-surface landscape irrigation systems. The 1.2mm wall thickness and smooth internal bore work together to reduce pressure loss and friction for maximum water flow allowing sprinkler nozzles to function optimally. |
 |
HydroSure Barbed Tap Connecter - 3/4" BSP Female x 14mmConnect LDPE pipe to the tap for a simple yet reliable way to supply water to your underground irrigation system. |
 |
5 x HydroSure Elbow Connector - 13mm x 1/2" BSP MaleThe male threaded outlet ensures a watertight fit with the female thread of the spray body and the ergonomically shaped barbed inlet anchors the LDPE pipe in place. Ideal for installing a pop-up spray body at the end of a length of pipe or in the centre of a garden bed. Top Tip: For all male threads, wrap two layers of PTFE tape around the thread wound in a clockwise direction. |
 |
5 x HydroSure Tee Adaptor - 13mm x 1/2" BSP MaleDesigned to be installed in an upright position to take pop-up spray bodies to their sub-surface position. Install the barbed inlets to the LDPE for sprinkler installation along the lateral pipe. |
 |
HydroSure Essential 14mm Double Barbed Fittings Pack – SmallUse to divert LDPE pipe in different directions, navigate around corners, join lengths of pipe and cap off any open ends to maintain pressure within the system. Features 2 x Joiners, 6 x Elbows, 3 x End Pieces and 5 x Tee Connectors. The 14mm tapered barb locks into the LDPE pipe for a reliable watertight connection and minimal risk of pipe dislocation. |
 |
40 x HydroSure Ratchet Clamp - 13mmFor a watertight join at every barbed connection point, install a ratchet clamp to minimise pipe blow off under high pressures. Top Tip: During installation check every connection point to ensure ratchet clamps are securing pipe in place before burying the system underground. |
 |
3 x HydroSure Flushing Valve Indented - 14mmFlushes and drains water from the pipe preventing excess water from freezing during colder winter months and damaging the system. Install at the lowest point of the system at the end of a run of pipe. Top Tip: For easy accessibility during system maintenance, install the drain valve within a valve box. |
 |
PTFE Thread Seal Tape - 12 MetresUse for all male threads and wrap two layers of PTFE tape around the thread wound in a clockwise direction. |
When installing your system, ensure the set-up complies with local waterboard regulations and includes backflow prevention.
| Product Code | SPRINKLERSYSTEM |
|---|---|
| EAN | 5056287725223 |
| Manufacturer's Guarantee | 1 Year |
| Number Of Emitters | 5 |
| Spike Mounted | No |
| Adjustable Flow Rate | No |
| Internal Diameter | 9/16" / 14mm |
| Price Per Unit (Inc. VAT) | 84.00 |
Downloads
Customers who bought this item also bought
-
-
-
HydroSure LDPE Pipe - 14mm x 25m - Black (16mm external)
£14.48 £12.07Price per Metre: £0.48Price per Metre: £0.58 -
-
Complete your system
-
-
-
HydroSure LDPE Pipe - 14mm x 25m - Black (16mm external)
£14.48 £12.07Price per Metre: £0.48Price per Metre: £0.58 -
-
