Hydrosure Agricultural Impulse Part Circle High Flow Sprinkler - 1"BSP Female

For optimal water coverage and performance, this impact sprinkler is complete with part-circle adjustability for use along the side or in the corner of an irrigation project. Simply adjust the trip collar to limit the watering area – The closer the collars are, the narrower the spray.

Designed from high-quality, corrosion and rust-resistant brass and stainless steel whilst the high-resistance rotating joints prevent wear during constant rotation promising long-lasting, heavy-duty use season after season.

The sprinkler features one main long reach nozzle with a 28º trajectory that emits water to the full radius whilst a secondary small reach nozzle with a 14º trajectory nozzle delivers water at ground level minimising dry spots along the full radius of the sprinkler. For even coverage, ensure sprinkler spacing achieves head-to-head watering meaning the spray pattern of one sprinkler must reach the location where another sprinkler is in situ to ensure sufficient overlap.

For optimal performance, operate the sprinkler at a minimum pressure of 3.5 bar and a maximum of 6 bar for constant and continuous rotation. The sprinkler radius, reach and output is dependent on water pressure allowing the watering pattern to cover a range between 16 to 24 metres, a litre per hour output from 2240 LPH to 7840 LPH and a maximum stream height of up to 6 metres. Please Note: Whilst the medium flow rate produces a wind-resistant spray pattern, sprinkler performance will vary in outdoor conditions.

For large areas, install multiple sprinklers on a run of Hose Pipe using a Triple Hose Joiner. Please note: Impact sprinklers require a minimum pressure and flow rate before rotation begins. For optimum performance, Calculate Water Flow Rate to determine how many sprinklers can be installed from a single water source. Multiple sprinklers may need to be installed from a Dual Outlet Timer or Water Distributor and each outlet is run independently at different times.

Arrives complete with a 1” female threaded inlet for easy connection to Sprinkler Mounts. Adapt the inlet thread to standard-sized sprinkler mounts using any Threaded Adaptor with a 1” male inlet for full compatibility. Spike is not included.