Key Benefits
Number of stations: The base model features 4 stations with the option of having a total of 23 stations when using an expansion module (not included).
Two sensor inputs as standard for use with Hunter Clik or Solar Sync™ Sensors (not included).
Features a 1 P/MV output for Pump Start Relay and master valve activation (not included).
Features a large interface with a backlit display for simple programming day or night.

Easy Retrieve Memory
The manual backup utility stores complete controller scheduling and setup information in the backup memory.

Automatic Short-Circuit Protection
Automatically detect electrical faults typically caused by wiring issues.
Only affected stations are skipped, allowing all other stations to water normally as programmed.

Quick Check Technology
The QuickCheck feature displays an “ERR” message when a field wiring short is detected.

Seasonal Adjustment
Enables quick adjustment to irrigation run times based on seasonal weather conditions.
Global: The Global option provides a Seasonal Adjustment percentage to all station run times on all of the controller’s programs.
Daily: With the addition of a Solar Sync ET Sensor (not included), the controller can automatically implement daily adjustments based on measured local weather.

Full Station Control
Program a delay from a few seconds to a much longer period between stations to permit slow-closing valves additional time to close or for pressure tanks time to recharge.
For fully customisable scheduling, the Pro-C features 3 independent irrigation programs with 4 start times each.
Enables flexible run times with the option to set watering cycles to water for seconds rather than minutes – Ideal when precision watering is required.

Sensor Programmability
In response to a specific alarm sensor, the watering program can be shut down while programs unaffected by the sensor can continue automatic operation.

Non-Water Days
Program days of the week to “OFF” so that irrigation does not occur regardless of program interval schedules.

• Transformer input: 120 VAC or 230 VAC
• Transformer output (24 VAC): 1 A
• Station output (24 VAC): 0.56 A
• P/MV output (24 VAC): 0.28 A
• Approvals: UL, cUL, FCC, CE, UKCA, RCM
• Warranty period: 2 years